Acceptorless Photocatalytic Dehydrogenation of Furfuryl Alcohol (FOL) to Furfural (FAL) and Furoic Acid (FA) over Ti3C2Tx/CdS under Visible Light

Acceptorless photocatalytic dehydrogenation is not only a promising alternative to photocatalytic water splitting for hydrogen generation but also provides a green and sustainable strategy for the synthesis of value-added organic compounds. In this work, Ti₃C₂T_x/CdS nanocomposites were obtained by self-assembly of hexagonal CdS in the presence of preformed Ti₃C₂T_x nanosheets, which serves as a photocatalyst for acceptorless dehydrogenation of biomass-derived furfuryl alcohol (FOL) to furfural (FAL) and furoic acid (FA) in neutral and alkaline medium respectively, with simultaneous generation of stoichiometric hydrogen under visible light. Ti₃C₂T_x MXene acts as an efficient cocatalyst for the photocatalytic dehydrogenation of FOL over CdS, with an optimum performance achieved over 0.50 wt% Ti₃C₂T_x/CdS nanocomposite. This study provides an economic and sustainable strategy for the simultaneous valorization of biomass-derived FOL to produce FAL and FA as well as the production of clean energy hydrogen under mild condition based on noble metal-free semiconductor-based photocatalysts.     

Molecularly engineered graphene surfaces for sensing applications: A review

Graphene is scientifically and commercially important because of its unique molecular structure which is monoatomic in thickness, rigorously two-dimensional and highly conjugated. Consequently, graphene exhibits exceptional electrical, optical, thermal and mechanical properties. Herein, we critically discuss the surface modification of graphene, the specific advantages that graphene-based materials can provide over other materials in sensor research and their related chemical and electrochemical properties. Furthermore, we describe the latest developments in the use of these materials for sensing technology, including chemical sensors and biosensors and their applications in security, environmental safety and diseases detection and diagnosis.     

Poly(vinyl alcohol)/GO-MMT nanocomposites: Preparation,structure and properties

A facile, efficient and environment friendly method is established to prepare poly(vinyl alcohol)(PVA) based graphene oxide-montmorillonite(GO-MMT) nanocomposites in aqueous media. GO-MMT nanohybrid is obtained by the combination of GO and MMT in water without any reducing or stabilizing agents. The formation of GO-MMT nanohybrid is due to the hydrogen bonding and crosslinking effects. The sodium ions within MMT sheets act as crosslinkers between GO sheets and MMT platelets. The resultant nanocomposites are characterized by means of X-ray diffraction(XRD), scanning electron microscopy(SEM), differential scanning calorimetry(DSC), thermogravimetric analysis(TGA) and mechanical testing. Compared to that of pure PVA, PVA nanocomposites show enhanced thermal stabilities and mechanical properties, which results from strong interfacial adhesion of the nanoadditives in PVA matrix. The further increase in the tensile strength and modulus results from strong interaction between PVA chains and layered GO-MMT as well as good mechanical properties of GO-MMT hybrid, compared to PVA/GO and PVA/MMT nanocompsoites.     

钴镁铝类水滑石液相选择性催化苯甲醇氧化合成苯甲醛

采用共沉淀法制备了不同Co₂AlMg_x(x=0.5、1、1.5和2)原子比的类水滑石,用X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、傅里叶变换红外光谱(FT-IR)、表面孔吸附(BET)及电感耦合等离子光谱(ICP)等技术手段表征了催化剂的结构、组成和比表面积,并考察了其催化苯甲醇选择氧化制苯甲醛的性能。 结果表明,随着Mg含量的增加,催化剂的碱性增强,苯甲醛的选择性提高。 在优化条件:苯甲醇0.02 mol,催化剂Co₂AlMg₁类水滑石100 mg,过氧化氢叔丁醇0.04 mol,溶剂乙腈8 mL,反应温度60 ℃,反应时间9 h下,苯甲醇的转化率为39.5%,苯甲醛的选择性达到89.2%。 催化剂重复使用5次后其活性与选择性未见明显降低,表明催化剂具有较好的稳定性。     

粘土担载的钼基催化剂的制备、结构及CO加氢合成醇性能

采用溶胶凝胶法与等体积浸渍相结合制备了一系列以粘土为载体的K-Co-Mo催化剂. 采用XRD、N₂等温吸脱附、H_{26+的还原,但对Mo⁴⁺和Co²⁺的还原没有明显的影响. 催化剂经还原后,在其表面生成了一种更低价态的Mo^δ+(1<δ<4)物种,被认为是合成醇的活性中心. 与非负载催化剂相比,粘土担载的K-Co-Mo具有更高的合成醇性能. 负载型催化剂具有较高的活性物种分散度,并且其介孔结构在一定程度上延长了合成醇反应中间体的滞留时间,从而促进了低碳醇的生成. 经773 K还原的催化剂具有较高的活性,其原因可为催化剂表面具有较高含量的Mo^δ+物种.}     

Fabrication and Optimization of Poly(vinyl alcohol)/Zirconium Acetate Electrospun Nanofibers Using Taguchi Experimental Design

This paper presents an investigation regarding poly(vinyl alcohol)/zirconium acetate (organic–inorganic) (PVA/Zrace) nanofibers prepared by electrospinning which could be used as a precursor for fabricating ceramic metal oxide nanofibers. The effect of some processing variables, including polymer solution concentration, tip to collector distance and applied voltage of electrospinning, and the amount of Zrace and their interactions, on the diameter of the nanofibers were studied. Taguchi experimental design and a statistical analysis (ANOVA) were employed and the relationship between experimental conditions and yield levels determined. It was concluded that to obtain a narrow diameter distribution as well as maximum fiber fineness, a polymer concentration of 10 wt%, tip to collector distance of 18 cm and applied voltage of 20 kV variables were the optimum. Furthermore, it was also concluded that the ratio of Zrace (6 g) to PVA solution (10% wt) played an important role for achieving the minimum fiber diameter. Under these optimum conditions, the diameters of the electrospun composite fibers ranged from 86 nm to 381 nm with a diameter average of 193 nm. The experiments were done with Qualitek-4 software with “smaller is better” as the quality characteristics. The optimized conditions showed an improvement in the fibers diameter distribution and the average fibers diameter showed good resemblance with the result predicted using the Taguchi method and the Qualitek-4 software. The ANOVA results showed that all factors had significant effects on the fibers diameter and distribution, but the effect of PVA concentration and zirconium acetate were more significant than the other factors.     

Simultaneous measurement of methyl tert‐butyl ether and tert‐butyl alcohol in human serum by headspace solid‐phase microextraction gas chromatography–mass spectrometry

The abundant production of methyl tert‐butyl ether (MTBE) and its widespread use have led to an increase in the potential for human exposure. This work described a simple, fast, sensitive, reliable and low‐cost method for the simultaneous measurement of MTBE and its metabolite, tert‐butyl alcohol (TBA) in human serum by headspace solid‐phase microextraction gas chromatography–mass spectrometry. Extraction conditions were optimized and 40 °C, 10 min, 250 rpm and 0.3 g NaCl for a 1 mL sample were the optimal conditions. This method showed good analytical performance in terms of sensitivity with limits of detection in serum (1 mL) of 0.03 µg/L for MTBE and 0.05 µg/L for TBA, accuracy (mean recovery values) from 75.8% to 85.8%, precision (relative standard deviations) <10% and sample stability (biodegradation) <10% after 28 days. A verification experiment proved the reproducibility and stability of this method as well. Finally the method was used to detect 212 specimens, and the internal dose levels for MTBE in human serum were presented in China. Copyright © 2015 John Wiley & Sons, Ltd.     

“蜡烛火焰划分”实验的局限成因分析及改进研究

人教版初中化学首个探究性实验"蜡烛及其燃烧"明确指出火焰的划分方法，但在实际教学中肉眼观察法和火柴梗燃烧法对蜡烛火焰的划分存在一定的局限性。采用文献研究法和实验验证法分析其局限性的成因——燃料的析炭能力强弱、材料结构的不同等，并提出相应的改进建议。     

Simultaneous detection of ammonia and humidity using transmission surface plasmon resonance technique

Abstract

Gas sensing by using the transmission surface plasmon resonance (T-SPR) technique was demonstrated. Polyacrylic acid (PAA)/5-nm-thick gold/40-nm-thick silver/polycarbonate grating substrate structure (Sensor A) responded to ammonia; however, it exhibited a strong humidity dependence. Polyvinyl alcohol (PVA)/5-nm-thick gold/40-nm-thick silver/polycarbonate grating substrate structure (Sensor B) as the sensing material was also prepared and it mainly responded to humidity. The T-SPR properties of Sensors A and B were observed simultaneously by a stacking arrangement that enabled us to obtain the responses by using a single spectrophotometer. The ammonia concentration under various humidity conditions could be accurately obtained by simultaneous measurement of Sensors A and B.     

Cetyl‐alcohol‐reinforced hollow fiber solid/liquid‐phase microextraction and HPLC–DAD analysis of ezetimibe and simvastatin in human plasma and urine

A new cetyl‐alcohol‐reinforced hollow fiber solid/liquid‐phase microextraction (CA–HF–SLPME) followed by high‐performance liquid chromatography–diode array detection (HPLC–DAD) method was developed for simultaneous determination of ezetimibe and simvastatin in human plasma and urine samples. To prepare the CA–HF–SLPME device, the cetyl‐alcohol was immobilized into the pores of a 2.5 cm hollow fiber micro‐tube and the lumen of the micro‐tube was filled with 1‐octanol with the two ends sealed. Afterwards, the prepared device was introduced into 10 mL of the sample solution containing the analytes with agitation. Under optimized conditions, calibration curves plotted in spiked plasma and urine samples were linear in the ranges of 0.363–25/0.49–25 μg L^?1 for ezetimibe/simvastatin and 0.193–25/0.312–25 μg L^?1 for ezetimibe/simvastatin in plasma and urine samples, respectively. The limit of detection was 0.109/0.174 μg L^?1 for ezetimibe/simvastatin in plasma and 0.058/0.093 μg L^?1 for ezetimibe/simvastatin in urine. As a potential application, the proposed method was applied to determine the concentration of selected analytes in patient plasma and urine samples after medication and satisfactory results were achieved. In comparison with reference methods, the CA–HF–SLPME–HPLC–DAD method demonstrates considerable potential in the biopharmaceutical analysis of selected drugs.